My Inner barrel is misaligned (please help)

Picture intensive step-by-step upgrade guides.

Moderator: THE ARCHANGEL

Post Reply
Npc200
Newbie
Posts: 14
Joined: Sun May 13, 2012 12:37 pm
Location: St. Paul Minnesota

My Inner barrel is misaligned (please help)

Post by Npc200 » Sat Nov 23, 2013 7:40 pm

I bought a G&G Combat Machine with the intention of upgrading it but it seems that my inner barrel is so misaligned that it is nearly touching the upper right side of the outer barrel. I took out it out and it doesn't seem to be bent, I have played with the gun it isn't unusable just very inaccurate. I intend to replace the barrel with a Madbull 6.03mm but I am worried that the barrel seems straight as is and there could be a problem with something else.
Am I worrying over nothing or is this an actual problem?

User avatar
Guges Mk3
MAA Member
Posts: 8840
Joined: Thu Jul 12, 2001 3:01 am
Location: MN

Re: My Inner barrel is misaligned (please help)

Post by Guges Mk3 » Sun Nov 24, 2013 2:48 pm

First off the MB is not going to give you an improvement that a good cleaning and polishing of the stock barrel will not accomplish. These are NOT firearms and a tighter barrel is not better. Trend is going back to TM spec where bigger gap is better and physics back that up.

With that G&G CM have been slowly going downhill in quality...the dies are getting old and tolerances are increasing.

Try shimming your inner barrel to be in the center of your outer barrel.
I rather use a "nightmare" that shoots like a dream over something that looks like a "dream" but shoots like a nightmare.

Don't fear the gun...fear the one that's wielding it!

Jonnyboyman
A Regular
Posts: 218
Joined: Sat Jan 12, 2013 6:42 pm
Location: St. Paul, MN

Re: My Inner barrel is misaligned (please help)

Post by Jonnyboyman » Mon Nov 25, 2013 3:52 am

Those G&G combat machines...

Magkill
A Regular
Posts: 233
Joined: Thu Jan 24, 2013 11:01 pm
Location: Minnetonka.

Re: My Inner barrel is misaligned (please help)

Post by Magkill » Mon Nov 25, 2013 8:42 am

Jonnyboyman wrote:Those G&G combat machines...
Haha true. Sadly Mitch , jake, and Nate use them.
Code name: magkill

Team: Task Force Pallaton

Weapon of choice g&g gr-25

User avatar
FoxtrotMitch
A Regular
Posts: 137
Joined: Sat Jun 02, 2012 5:42 pm
Location: Mound, MN

Re: My Inner barrel is misaligned (please help)

Post by FoxtrotMitch » Mon Nov 25, 2013 4:41 pm

I'm actually getting a 416 hopefully when I get some money…don't hate my G&G has served me well :D.
Codename: Irish
Task Force Pallaton
FoxtrotMitchHD Youtube Channel - Subscribe!

slusk17
A Regular
Posts: 227
Joined: Sun Sep 09, 2012 5:50 pm
Location: Buffalo,MN

Re: My Inner barrel is misaligned (please help)

Post by slusk17 » Tue Nov 26, 2013 9:50 am

My g&g works mighty well except that the stock is a piece of crap and consistently falls off from time to time. Mine fell off during the breifing of the Operation Cerebus breifing otherwise the quality of the Combat Machines please me.
Codename: Gunnar

Task Force Pallaton

Jonnyboyman
A Regular
Posts: 218
Joined: Sat Jan 12, 2013 6:42 pm
Location: St. Paul, MN

Re: My Inner barrel is misaligned (please help)

Post by Jonnyboyman » Tue Nov 26, 2013 9:24 pm

Magkill wrote:
Jonnyboyman wrote:Those G&G combat machines...
Haha true. Sadly Mitch , jake, and Nate use them.
I used to use them too... but now, all G&G internals on my gun have been replaced.
Last edited by Jonnyboyman on Sat Feb 01, 2014 9:14 pm, edited 1 time in total.

Magkill
A Regular
Posts: 233
Joined: Thu Jan 24, 2013 11:01 pm
Location: Minnetonka.

Re: My Inner barrel is misaligned (please help)

Post by Magkill » Fri Nov 29, 2013 11:07 pm

Ya g&gs are good but not long lasting. you could easily just buy a gun with full metal externals and customize the internals, it would be much easier to do that than to eventually buy an expensive gun.

Sorry we high jacked the thread. Let's try not to do this again it's not fair to the people who only want to discuss the topic.
Code name: magkill

Team: Task Force Pallaton

Weapon of choice g&g gr-25

User avatar
neoM4tech
A Regular
Posts: 167
Joined: Fri Mar 01, 2013 1:38 pm
Location: Hutchinson Mn
Contact:

Re: My Inner barrel is misaligned (please help)

Post by neoM4tech » Wed Jan 29, 2014 11:50 pm

There is a huge difference between a G&G CM and a G&G top tech. The CM is basically the reverse of a lancer tactical. LT has a decent gearbox and trash exterior, CM has an ok exterior and trash for internals. (aluminum barrel stock being one example). G&G top tech is pretty good. Couple minor upgrade parts and you have a decent gun. I find it annoying that people give G&G a bad name as a company when it is just their CM line that is trash.

Post Reply

Return to “Airsoft Upgrade How To Guides”

Who is online

Users browsing this forum: No registered users and 1 guest