TM Spas 12: Attaching the metal stock?

Discuss your favorite Airsoft weaponry.

Moderators: THE ARCHANGEL, Guges Mk3

Post Reply
User avatar
Rook
MAA Member
Posts: 221
Joined: Fri Jul 13, 2001 3:01 am
Location: Bemidji, MN
Contact:

TM Spas 12: Attaching the metal stock?

Post by Rook » Fri Aug 07, 2015 3:14 pm

Does the TM Spas 12 come with the necessary hardware to attach the folding stock, or am I going
to need to fabricate/source spare parts?

From the photos I've seen, it appears that the rear sling bolt is used to hold the stock, but is
there a spring loaded button or pin on the right side to lock it into place?

I have a stock incoming from Japan, but it doesn't have any additional hardware.
Other than that, just need to find the shotgun now. :)
http://www.rookscastle.com

There's something wrong with my gun... I think it's a loose nut behind the trigger.

User avatar
Tank
Team PALADIN
Posts: 3752
Joined: Fri Jan 24, 2003 4:01 am
Location: Minneapolis

Re: TM Spas 12: Attaching the metal stock?

Post by Tank » Sat Aug 08, 2015 9:47 pm

IIRC, the complete stock kits had all the hardware that needs to be changed. I do not remember what specifically needs to be changed. That said I'm pretty sure at the very least, there's a longer bolt that needs to be installed.
It's been a LONG time since I've seen one though.
MAA Member Number: 47
Team PALADIN
MAA BATC Instructor / Cadre

User avatar
Rook
MAA Member
Posts: 221
Joined: Fri Jul 13, 2001 3:01 am
Location: Bemidji, MN
Contact:

Re: TM Spas 12: Attaching the metal stock?

Post by Rook » Sun Aug 09, 2015 5:18 pm

Yeah, they're pretty rare now. There was a complete gun on eBay, but I already bought the stock alone and I couldn't really afford near the cost of two guns. :/
http://www.rookscastle.com

There's something wrong with my gun... I think it's a loose nut behind the trigger.

Post Reply

Return to “Guns Discussion”

Who is online

Users browsing this forum: No registered users and 1 guest