Search found 2191 matches

by Bunny
Fri Jun 10, 2016 6:15 pm
Forum: Guns Discussion
Topic: Spr freedom
Replies: 3
Views: 497

Re: Spr freedom

Yah, a few use two set screws, either in-line about 1/4" apart or on opposite sides. The far more likely reason though is glue. If you can get a good grip on the barrel you can just torque it hard to try to break the glue, that sometimes works so long as you don't break some other part of the gun. O...
by Bunny
Tue Jun 07, 2016 5:57 pm
Forum: Guns Discussion
Topic: P90 Advice
Replies: 3
Views: 390

Re: P90 Advice

What kinds of upgrades are you looking at doing? Internally, there's not a lot of difference between a P90 and just about any other AEG. Externally there are not nearly as many available upgrades for the P90 as some other platforms - most notably various AR15s. But there are some super unique mods a...
by Bunny
Wed May 04, 2016 10:21 pm
Forum: General Airsoft
Topic: Looking for two used pontoons for new DDAY course at Twin Cities Airsoft
Replies: 2
Views: 411

Re: Looking for two used pontoons for new DDAY course at Twin Cities Airsoft

This sounds pretty cool - I'm excited to see what comes of it!
by Bunny
Sat Nov 01, 2014 10:46 pm
Forum: Gear Discussion
Topic: Helmet Recommendation?
Replies: 2
Views: 617

Re: Helmet Recommendation?

Swing by OpFor Airsoft, Dan has exactly what you're looking for.

Clark
by Bunny
Sat Nov 01, 2014 10:44 pm
Forum: Gear Discussion
Topic: Looking for Red Dot advice/recommendations
Replies: 8
Views: 1070

Re: Looking for Red Dot advice/recommendations

Take a look at Primary Arms.

https://www.primaryarms.com/Primary_Arms_s/586.htm

They're not extremely pricey and remarkably high quality. I run them on 3 of my airsoft guns and have run them on my real AR15s as well. Highly recommended.

Clark
by Bunny
Sat Nov 01, 2014 10:35 pm
Forum: General Airsoft
Topic: USMC Loadout help
Replies: 2
Views: 787

Re: USMC Loadout help

What time period are you trying to replicate?

Clark
by Bunny
Sat Nov 01, 2014 10:35 pm
Forum: General Airsoft
Topic: Half mask+ goggles vs full mask
Replies: 3
Views: 872

Re: Half mask+ goggles vs full mask

Like EZD said, this is something required by insurance companies, so it's not something even field owners have any wiggle room with. The only thing you can do is suck it up and wear a paintball mask until you're 18.

Clarl
by Bunny
Sat Jun 14, 2014 1:21 am
Forum: Help Forum
Topic: Castle Nut removal
Replies: 7
Views: 1094

Re: Castle Nut removal

Are you sure that the castle nut actually comes off? Some airsoft buffer tubes just have fake castle nuts and threading on them but are actually a single piece of cast metal. I know my TM buffer tube is like that, not sure about G&G though. Did you get a real-steel or airsoft sling mount? Some airso...
by Bunny
Fri Jun 13, 2014 12:04 am
Forum: Off Topic
Topic: PC enthusiast/gaming rig
Replies: 6
Views: 1254

Re: PC enthusiast/gaming rig

If you already have a box with an i7 and you don't want another hyperthreading rig, why go with Intel at all? You'll get more bang for your buck with an AMD chip, the only thing you really loose is hyperthreading.

Clark
by Bunny
Thu May 22, 2014 11:08 pm
Forum: Help Forum
Topic: Outer Barrel Wobble
Replies: 5
Views: 1039

Re: Outer Barrel Wobble

Typically that's caused by a loose barrel nut. You'll need to get the rail off to get at it, every gun is a bit different.

Also, moved topic to the Help section.

Clark
by Bunny
Mon May 19, 2014 9:35 pm
Forum: Guns Discussion
Topic: Hows My List?
Replies: 8
Views: 805

Re: Hows My List?

on a side note, to get it cheaper, don't buy the stuff from ASGI, go to MasterTCAA (OpFor dan on facebook) or Guges (chris yue). they can get the same stuff or better for cheaper. This. Dan and Guges are real people you can talk to and get advice from: they'll get you set up with what you need. The...
by Bunny
Sun May 11, 2014 11:47 pm
Forum: Off Topic
Topic: Video Editing PC
Replies: 5
Views: 1138

Re: Video Editing PC

Alright, I would stick with an AMD processor then if you're not yet tied to an NLE, you get way more bang for your buck. Do you already have an operating system? A copy of Windows will cut into your budget, but your options for editors will be severely limited on a Linux distro. I would start with a...
by Bunny
Sat May 10, 2014 10:48 pm
Forum: Off Topic
Topic: Video Editing PC
Replies: 5
Views: 1138

Re: Video Editing PC

Starting from scratch that's going to be a pretty hard budget to hit, especially if you don't already have a decent monitor. You'll want to start with a reasonably fast 64-bit AMD processor, at least 4GB of RAM (8 would be better), a graphics card, plenty of hard drive space (1TB+), and a motherboar...
by Bunny
Wed Apr 30, 2014 11:55 pm
Forum: Guns Discussion
Topic: Post Pics of your Gun - Part II
Replies: 1511
Views: 130360

Re: Post Pics of your Gun - Part II

Ok. I have been experimenting with homemade magpul designs so I was curious what u had done. I actually started doing this before Magpul was really popular, first with 100mph tape and then later with Gorilla Tape. The trick is getting a design that won't collapse easily as a mag pull that's all bun...
by Bunny
Fri Apr 25, 2014 12:16 pm
Forum: Guns Discussion
Topic: Post Pics of your Gun - Part II
Replies: 1511
Views: 130360

Re: Post Pics of your Gun - Part II

mhofstad wrote:Are those magpuls homemade bunny? Or am I seeing things?
On the bottom of the AR mags? Yes, those are just gorilla tape.

Clark
by Bunny
Fri Apr 25, 2014 11:31 am
Forum: Guns Discussion
Topic: Post Pics of your Gun - Part II
Replies: 1511
Views: 130360

Re: Post Pics of your Gun - Part II

Finally finished the MP5 I've been tinkering with for years! https://lh6.googleusercontent.com/-PBdupEvN13Q/U1qMOYjTKzI/AAAAAAAAX6Q/6zsrznjxEiY/w1252-h835-no/IMG_1519.jpg It's a TM mechbox, CA metal body, TM front RIS, Nitro top rail, Magpul RVG and finger stop kit, Nebo Protech HP190 weapon light, ...
by Bunny
Mon Apr 21, 2014 11:46 am
Forum: Off Topic
Topic: Is This the way Airsofters should deal with this?
Replies: 12
Views: 1472

Re: Is This the way Airsofters should deal with this?

I have always hated the "Keep shooting until they call it" or "I shoot them in the face/hands/uncovered spots until they call it" mentality. This is mostly because there's a sweet spot, a place where a player gets hit and then needs time to process it and call themselves out. Yah, and this is a dif...
by Bunny
Sun Apr 20, 2014 11:03 am
Forum: General Airsoft
Topic: Please, Everyone, Call Your Hits
Replies: 8
Views: 1284

Re: Please, Everyone, Call Your Hits

Cheating that blatant is unusual, and I think it would be totally reasonable for you to call them out by name. As much as this is a problem with the team and individual players, I think it also reflects very poorly on Devil Ops that something that bad would even have been allowed to happen. If they ...
by Bunny
Sun Apr 20, 2014 10:57 am
Forum: Off Topic
Topic: Is This the way Airsofters should deal with this?
Replies: 12
Views: 1472

Re: Is This the way Airsofters should deal with this?

On a side note, I wouldn't be entirely opposed to refs carrying pistols to "test" accused cheaters to see if they actually call their hits. The DMG guys who run the Breedland and Vigilance Ops at Apoc do exactly this, though they tend to just do it to everyone not just people they accuse of cheatin...
by Bunny
Sat Apr 19, 2014 10:18 am
Forum: Off Topic
Topic: Is This the way Airsofters should deal with this?
Replies: 12
Views: 1472

Re: Is This the way Airsofters should deal with this?

That's strait bullshit. I see no hard evidence of any of his so-called "hits" on video. A white streak going in the direction of the target does not mean that the BB actually hit, BBs do weird things, bounce easily, and can curve servery mid-flight. The stupidest thing in the whole video is that non...
by Bunny
Tue Apr 15, 2014 11:11 pm
Forum: Guns Discussion
Topic: What options are there other than the PEQ box?
Replies: 16
Views: 1103

Re: What options are there other than the PEQ box?

The two options Tank listed are certainly the most common - and generally with good reason - but there are other options. You could mount the battery on a sling, like has already been stated, by mounting a small pouch close to the rear mount point and running the wires up the sling. Laylax I know ma...
by Bunny
Tue Apr 15, 2014 11:04 pm
Forum: Gear Discussion
Topic: Facemask and Helmet Combo
Replies: 6
Views: 1107

Re: Facemask and Helmet Combo

I run my facemask with helmet clips as well. I cut the elastic straps that were designed to go around my head to hold up the mask, and used some buckles to attach the helmet clips onto them. My clips also came with my helmet, and the one you linked to does as well - they are fitted into the accessor...
by Bunny
Mon Apr 14, 2014 7:34 pm
Forum: General Airsoft
Topic: Nitro Vo Top Rail or Apple Swordfish Kit
Replies: 12
Views: 1393

Re: Nitro Vo Top Rail or Apple Swordfish Kit

Got it in the mail today and installed, everything fits! Now, I want to do something with the stock other than a full stock, but I'm not sure what. The basic collapsible stock would be alright, but I'd like something a bit more unique and cool. Got any ideas? Guges, you have anything laying around t...
by Bunny
Tue Apr 08, 2014 1:49 pm
Forum: Help Forum
Topic: Obsolete OEM Parts?
Replies: 3
Views: 1250

Re: Obsolete OEM Parts?

Moved to Help.
by Bunny
Tue Apr 08, 2014 10:35 am
Forum: General Airsoft
Topic: Nitro Vo Top Rail or Apple Swordfish Kit
Replies: 12
Views: 1393

Re: Nitro Vo Top Rail or Apple Swordfish Kit

It's the same as the stock front pin isn't it? Could I just use the one that comes out of the normal front sight block?

Clark
by Bunny
Mon Apr 07, 2014 8:07 pm
Forum: General Airsoft
Topic: Nitro Vo Top Rail or Apple Swordfish Kit
Replies: 12
Views: 1393

Re: Nitro Vo Top Rail or Apple Swordfish Kit

Awesome, PM me your address?
by Bunny
Mon Apr 07, 2014 7:22 pm
Forum: General Airsoft
Topic: Nitro Vo Top Rail or Apple Swordfish Kit
Replies: 12
Views: 1393

Re: Nitro Vo Top Rail or Apple Swordfish Kit

The Nitro top rail.

Thanks!
by Bunny
Mon Apr 07, 2014 11:56 am
Forum: Gear Discussion
Topic: 2003 USMC loadout help
Replies: 11
Views: 1306

Re: 2003 USMC loadout help

Why are you considering woodland pattern BDUs and desert gear? That is the opposite of what most Army and Marine units were using at that time. Even when units were deployed to Iraq in 91 and again in 2003 most soldiers and marines were wearing DCUs with woodland gear. Chocolate chip was phased out ...
by Bunny
Mon Apr 07, 2014 11:49 am
Forum: General Airsoft
Topic: Starting an airsoft team (2nd try)
Replies: 6
Views: 1065

Re: Starting an airsoft team (2nd try)

1: You must be 12 years of age, or older. Minnesota state law requires direct parental supervision for the use of an airsoft gun for anyone under the age of 14. So, unless you plan on inviting parents out to participate in all your airsoft events, and don't play at any MAA events, I would reconside...
by Bunny
Fri Apr 04, 2014 5:40 pm
Forum: Help Forum
Topic: Madbull Milspec buffer tube
Replies: 10
Views: 1155

Re: Madbull Milspec buffer tube

I've seen commercial stocks with flat back though, so that's not always a good reference - especially in airsoft. The one I usually use is that on Mil-Spec stocks the threads usually stick out above the level of the rest of the tube, while on commercial stocks the threads tend to be flush with the r...
by Bunny
Fri Apr 04, 2014 5:29 pm
Forum: Help Forum
Topic: Screw head sheared off?
Replies: 6
Views: 956

Re: Screw head sheared off?

By "sheared screw" I'm thinking that there is no head left on the screw at all? If that's the case a lot of these suggestions are unlikely to work. Did you break the screw torsionally or was it already broken when you found it? If it was a torsional failure then it's very likely that the remaining s...
by Bunny
Thu Apr 03, 2014 5:48 pm
Forum: Gear Discussion
Topic: Gear loadouts: Pics, Details, and Discussion
Replies: 796
Views: 157561

Re: Gear loadouts: Pics, Details, and Discussion

Lightweight skirmish / open session rig I built mostly from Guges' table at the Airsoft Concention, plus a few things I had laying around the house and cheap eBay purchases. https://lh3.googleusercontent.com/-M7-4I7p7al0/Uz3iztN0FRI/AAAAAAAAXlY/c7SctWzftXo/w1252-h835-no/IMG_1493.jpg MOLLE skeletal r...
by Bunny
Wed Mar 26, 2014 12:27 pm
Forum: General Airsoft
Topic: Straight MP5 Magazines, and M4 to MP5 magazine well adapter
Replies: 5
Views: 1073

Re: Straight MP5 Magazines, and M4 to MP5 magazine well adap

Interesting, and rather cool looking MP5 mags. Wish the standards were larger than 48 rounds though, that rather sucks. And I hate hi-caps.

Clark
by Bunny
Tue Mar 25, 2014 2:05 pm
Forum: PolarStar Forum
Topic: HP Bauer compressor for PolarStar at Twin Cities Airsoft
Replies: 1
Views: 626

Re: HP Bauer compressor for PolarStar at Twin Cities Airsoft

Moved into the Polarstar Forums where it's a bit more relevant :D

Clark
by Bunny
Mon Mar 03, 2014 10:10 pm
Forum: PolarStar Forum
Topic: P* Questions
Replies: 28
Views: 1974

Re: P* Questions

Moved
by Bunny
Thu Feb 20, 2014 12:36 am
Forum: General Airsoft
Topic: Minnesota Airsoft laws and questions
Replies: 5
Views: 806

Re: Minnesota Airsoft laws and questions

Airsoft can be tricky to to nail down legally, as to really have a good idea of the laws you need to follow you need to look at the state, county, and city laws independently. And of course, moving from one city to another can change everything. The simplest and safest thing you can do is treat your...
by Bunny
Wed Feb 19, 2014 10:55 am
Forum: PolarStar Forum
Topic: Supressor/Silencer discussion is a no-no
Replies: 7
Views: 607

Re: Supressor/Silencer discussion is a no-no

IMO:

Discussing outer barrel extensions designed to look like suppressors, or mock suppressors that are purely cosmetic = OK

Discussing the fabrication, modification, purchase, or use of a suppressor that is intended to reduce the report of an airsoft gun = Not OK.

Clark
by Bunny
Sun Feb 16, 2014 5:57 pm
Forum: Off Topic
Topic: Favorite Work Boots
Replies: 4
Views: 1123

Re: Favorite Work Boots

I wear 5.11 ATAC Shields every day at work. They tend to last me about 4 years before they really start to fall apart , but they also see quite a lot of abuse. They are comfortable, even after a 14 hour work day, and do a good job protecting the foot and ankle. My only complaint is that they are dam...
by Bunny
Tue Feb 11, 2014 11:42 am
Forum: Guns Discussion
Topic: Post Pics of your Gun - Part II
Replies: 1511
Views: 130360

Re: Post Pics of your Gun - Part II

Is that leather wrap on the stock? Yes. It's leather chord I wrapped around it to make the otherwise abysmal AKS stock a little more comfortable. I think it would look better with an off brand tac light. Thin leather sling, well worn receiver, and a name brand light. It doesn't mesh. Most of the ph...
by Bunny
Fri Feb 07, 2014 10:57 pm
Forum: Guns Discussion
Topic: Post Pics of your Gun - Part II
Replies: 1511
Views: 130360

Re: Post Pics of your Gun - Part II

Did a little work on my AK this evening: https://lh5.googleusercontent.com/-eLdbt_uk_04/UvWnTXAP3SI/AAAAAAAAWqU/j4PeOX5LVeE/w958-h639-no/IMG_1109.JPG I wanted a more modern tactical look and functionality, but I also wanted it to maintain an AK sensibility. I drew my inspiration from some of the mor...
by Bunny
Fri Jan 31, 2014 12:09 pm
Forum: Gear Discussion
Topic: Revision Desert Locus Fan
Replies: 12
Views: 1383

Re: Revision Desert Locus Fan

Are you set on getting Revisions? The ESS Turbofans are very popular and very well regarded, and they come with an integrated fan. Pair them with a mesh facemask when you want full face and you should solve all your problems.

Clark
by Bunny
Wed Jan 29, 2014 1:08 am
Forum: Gear Discussion
Topic: Op lightning strike load out?
Replies: 17
Views: 1880

Re: Op lightning strike load out?

I don't really recall it being warmer inside or outside the mall. Inside the mall obviously there won't be wind which helps with the temp, but you also have a lot of cold concrete. I think it all comes out a bit of a wash. I got chilly a few times standing around for briefings and such, but once the...
by Bunny
Tue Jan 28, 2014 6:16 pm
Forum: Gear Discussion
Topic: Op lightning strike load out?
Replies: 17
Views: 1880

Re: Op lightning strike load out?

Also, no power means no heat. We had pretty decent weather last year but being prepared for cold is not a bad idea. I froze my ass off laying on a concrete floor for hours at the night game...

Clark
by Bunny
Tue Jan 28, 2014 2:39 pm
Forum: Gear Discussion
Topic: Op lightning strike load out?
Replies: 17
Views: 1880

Re: Op lightning strike load out?

It's absolutely CQB. There are large areas like the main promenades and central courtyard but those tend to become deathtraps. Most of the fighting is going to be in back access hallways, offices, storerooms, loading docks, and department stores. Most of these places are quite cramped, have things y...
by Bunny
Thu Jan 16, 2014 12:07 pm
Forum: Newbie info - Archive - FAQ
Topic: How to post pictures?
Replies: 2
Views: 894

Re: How to post pictures?

Grab the URL for the image you wish to post, then put it in between Img brackets like this: [img]www.the_address_to_the_image_you_want_to_post.jpg[/img] As a shortcut you can use the Img button right above the text box for composing a post, which will create the tags for you. Then you just have to p...
by Bunny
Mon Jan 13, 2014 2:19 am
Forum: Gear Discussion
Topic: Thermal Goggles
Replies: 3
Views: 834

Re: Thermal Goggles

Nothing is 100% effective, I've fogged my thermal lenses, but it takes a huge amount of humidity to fog them. Usually by the time I have fogging problems I can literally see the humidity in the air around me. Getting a ventilation fan on your goggles is another option, such as the ESS Turbofan goggl...
by Bunny
Sat Jan 04, 2014 12:30 am
Forum: General Airsoft
Topic: Red dot sights that don't get washed out in snow?
Replies: 7
Views: 1545

Re: Red dot sights that don't get washed out in snow?

I've had very good experiences with my Primary Arms red dots. They tend to have very bright dots that I've never had a hard time seeing in bright daylight. They're reasonably rugged too, I use them on some of my real-steel rifles as well.

Clark
by Bunny
Fri Jan 03, 2014 6:31 pm
Forum: Guns Discussion
Topic: Famas Felin project
Replies: 8
Views: 1204

Re: Famas Felin project

I think I actually have a G36C rail laying around here somewhere I'd be willing to sell you for cheap.

Finding the FAMAS may be the hardest part!

Clark
by Bunny
Fri Dec 20, 2013 3:16 pm
Forum: Guns Discussion
Topic: Post Pics of your Gun - Part II
Replies: 1511
Views: 130360

Re: Post Pics of your Gun - Part II

Gotchya wrote:Here's my new piece! Cover your eyes if you're an AK purist...
Oh God my eyes! It burns! Why? Why would you create such a monster?

:lol:

Clark
by Bunny
Wed Dec 18, 2013 6:17 pm
Forum: Gear Discussion
Topic: Backpacks???
Replies: 18
Views: 2033

Re: Backpacks???

5.11 is on the lower end of the price scale for high quality gear, so if that's out then your options get limited. Check out LA Police Gear. They're offering discounts on 5.11 gear right now which might make some of their packs affordable to you. The LAPG-branded packs are also really cheap. I have ...

Go to advanced search